Welding Wire-Rod

Welding Rod Filler Wire in Nickel Alloys

We offer from stock a range of TIG & MIG welding rods in various nickel alloys. Size range starting from 0.8mm dia upto 4.76mm both in straight lengths and in coils. If you do not see any size or grade your reuqire not listed below, we might still be able to supply the same, contact us for a quote.

Monel 60 Welding wire/Rod (View All Products )

UNS N04060, Werkst.Nr 2.4377, AWS A5.14 ERNiCu-7

Monel filler metal 60 is used for gas –tungsten-arc, gas-metal-arc, and submerged-arc welding of Monel alloys 400, R404, and K-500 .It is also used for surfacing of steel by the gas-metal-arc or submerged-arc processes. For certain gas-meal –arc conditions, a barrier layer of Nickel Filler Metal 61 is recommended .Submerged-arc welding with Monel filler metal 60 is done with INCOFLUX 5 Submerged Arc Flux.

 

Weld metal deposited by Monel filler metal 60 has properties similar to those of Monel alloy 400.It has good strength and resists corrosion in many media, including sea water, salts, and reducing acids. The weld metal is not age hard enable and when used to join Monel alloy K-500 has lower strength than the base metal. (Ref: special metals corp).

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

Monel 67 Welding Wire/Rod (View All Products )

Monel alloy 67

UNS C71581 ,Werkst.Nr 2.0837, AWS A5.7  ERCuNi

Monel filler Metal 67 is used for oxyacetylene, gas-tungsten-arc, gas-metal-arc, and submerged –arc welding of Monel alloy 450(70/30 Copper Nickel) and other copper-nickel alloys. It is used for surfacing of steel if a barrier layer of Nickel Filler Metal 61 is first applied. If applied by the submerged-arc process, Monel Filler Metal 60 can be used for the barrier layer. Submerged-arc welding with Monel Filler Metal 67 is done with INCOFLUX 8 Submerged Arc Flux.

The copper-nickel weld metal has excellent resistance to corrosion in sea water, and is widely used for marine and desalination applications.

Dissimilar-welding applications for Monel Filler Metal 67 are joints between Monel alloys or Nickel 200 and copper–nickel alloys. (Ref: special metals corp).

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

Monel 187 Welding wire /Rod (View All Products )

Monel alloy 187

UNS W60715 Werkst.Nr 2.0838, AWS A5.6  ECuNi

Monel Welding Electrode 187 is used for shielded – metal – arc welding of wrought or cast 70/30, 80/20 and 90/10 copper –nickel alloys. Like the base metals with which it is used, the weld metal resists fouling and corrosion in sea water and is useful for many marine and desalination applications. Dissimilar joints welded with the electrode include those between copper-nickel alloys and Monel alloy 400 or Nickel 200.

The electrodes provide excellent operability for groove and fillet welding in the down hand position and the smaller diameter electrodes are also suitable for all position welding .Power supply: direct current, electrode positive. (ref: special metals corp).

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

 

Monel 190 Welding wire/Rod (View All Products )

Monel alloy 190

UNS W84190, W.Nr. 2.4366, AWS A5.11 ENiCu-7

Monel Welding Electrode 190 is used for shielded – metal – arc welding of Monel alloys 400, R-405, and K - 500. It is also used for surfacing of steel. The weld metal is resistant to corrosion by sea water, salts and reducing acids. The electrode is capable of producing weld deposits that meet stringent radiographic requirements .Although the electrode produces sound joints in Monel alloy K - 500, the weld metal has lower strength since, unlike the base metal,it is not age hard enable .Dissimilar –welding applications for Monel Welding Electrode 190 include joints between Monel nickel –copper alloys and carbon steel ,low alloy carbon steel ,copper and copper –nickel alloys.

The electrodes provide excellent operability for groove and fillet welding in the down hand position and the smaller diameter electrodes are also suitable for all position welding .Power supply: direct current, electrode positive. (ref : special metals corp).

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

Inconel 82 Welding wire/Rod (View All Products )

Inconel 82

UNS N06082, Werkst.Nr.2.4806,AWS A5.14,ERNiCr-3

 Inconel Filler Metal 82 is used for gas –tungsten-arc, gas-metal-arc and submerged-arc welding of Inconel alloys 600,601 and 690 ,Incoloy alloys 800 and 800HT and Incoloy alloy 330.It is used for surfacing of steel .Inco flux NT100 is used for submerged arc groove welding with this wire. For submerged –arc surfacing Inco flux NT100 is suitable.

Weld metal deposited by Inconel Filler Metal 82 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperature. (ref : special metals corp).

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

Inconel 112 Welding wire/Rod (View All Products )

Inconel 112

UNS W86112, Werkst.Nr.2.4621, AWS A5.11, ENiCrMo-3

Inconel Welding Electrode 112 is used for shielded-metal-arc welding of Inconel alloy 625, Incoloy alloy 825, Incoloy alloy 25-6MO and other molybdenum-containing stainless steels. It is used for surfacing of steel and for welding various corrosion resistant alloys such as alloy 20.Inconel Welding Electrode 112 is useful for many dissimilar joints involving Inconel alloys, Incoloy alloys, stainless steels, low alloy steel and carbon steels.

The electrodes provide excellent operability for groove and fillet welding in the down hand position and the smaller diameter electrodes are also suitable for all position welding .Power supply: direct current, electrode positive. Ref: Special Metals Corp.)

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com

Inconel 182 Welding wire/Rod (View All Products )

Inconel 182

UNS W86182, Werkst.Nr.2.4807,AWS A5.11ENiCrFe-3

Inconel Welding Electrode 182 is used for shielded –metal-arc welding of Inconel alloys 600 and 601 .The weld metal has excellent high temperature strength and oxidation resistance and can meet stringent radiographic requirements. Dissimilar welds for which the electrode are used include Inconel alloys and Incoloy alloys joined to carbon steels, stainless steels ,nickel and Monel alloys, Monel alloys joined to carbon steel, nickel joined to stainless steels and stainless steel joined to carbon steels.

The electrodes provide excellent operability for groove and fillet welding in the down hand position and the smaller diameter electrodes are also suitable for all position welding .Power supply: direct current, electrode positive. Ref: Special Metals Corp.)

For sizes not listed here, custom lengths/sizes and large quantities, please forward your requirements to sales@alloyshop.com